Victoria Arduino EAGLE ONE PRIMA User Handbook Manual page 56

Some operations must be car-
ried out when the machine is
switched off, while others can
be carried out when the ma-
chine is switched on.
Follow the procedures de-
scribed and take particular
care when carrying out any
cleaning operations.
E AG L E O N E P R I M A | L I B R E T TO I ST R UZ I O N I - U S E R H A N D B O O K - M A N U E L D 'I N ST R U CTI O N S | 5 6
CLEANING
• Avoid to clean the ma-
chine using water jets or
standing it in water.
• Do not use solvents, chlo-
rine-based products
abrasives.
• To prevent damage to the
appliance do not use alka-
line cleaning agents when
cleaning, use a soft cloth
and a mild detergent. (AS/
NZS 60335.2.15:2019).
9.1
BODY M ACHINE
CLEANING
or
Work area cleaning
• Remove the worktop, lift-
ing it up from the front and
sliding it out.
• Remove the
collection dish underneath.
• Clean everything with hot
water and cleansers.
External plates cleaning
To clean all aluminium parts,
turn the machine OFF and
use:
• A detergent designed for
cleaning aluminium.
• A non-abrasive microfibre
cloth to avoid scratching
the surfaces.
9.2
CLEANING THE
CO FFEE-HO LD ERS
Cleaning the coffee-holder
once a week:
• Turn the screw placed
in the centre of the cof-
water fee-holder.
• Slide the coffee-holder out
and check that its holes
are not obstructed but
clean. If obstructed, clean
as described.