Victoria Arduino EAGLE ONE PRIMA User Handbook Manual page 40

MACHINE RECEIVING
TRANS PO RT
+
The machine is trans-
ported on pallets con-
taining several ma-
chines inside cartons
strapped to the pallet.
Operators performing
any shipping or han-
dling operations must
wear gloves, safety
shoes and overalls with
elasticized cuffs.
The machine must be
moved by 2 or more
operators.
Failure to respect cur-
rent safety regulations
and standards on lifting
and handling materials
absolves the Manufac-
turer from all liability
for possible damage to
person or things.
E AG L E O N E P R I M A | L I B R E T TO I ST R UZ I O N I - U S E R H A N D B O O K - M A N U E L D 'I N ST R U CTI O N S | 4 0
MOVEMENTS
• Slowly lift the pallet
about 30 cm from the
ground and reach the
loading area.
• After checking that
there are no obsta-
cles, things or peo-
ple, proceed with the
loading.
• Once you arrive at
your destination, al-
ways with a suita-
ble lifting device (e.g.
forklift), after making
sure that there are
no things or people in
the unloading area,
take the pallet to the
ground and move it
about 30 cm from the
ground, until to the
storage area.
STO RED
5°C < < 50°C
The package contain-
ing the machine must
be stored away from
atmospheric agents.
Before performing the
following operations,
make certain that the
load is in stable and will
not fall when the straps
are cut.
Wearing gloves
safety shoes, the oper-
ator must cut the straps
and store the product.
During this operation,
see the product tech-
nical features for the
weight of the machine
being stored and pro-
ceed as necessary.
and