RGBlink SubitoNX S2 User Manual page 18

Note:After setting the sending card, it is necessary to click <Save to the sending card>, otherwise the previous setting
will be lost after power off and restarting.
SubitoNX S2/S4
1. Check the connection status of device.
Every time when you unplug the card,please
click to search the device again.
2. Click<Screen Configuration>to enter Sending Card
interface.
Please ensure that the resolution of sending card
should be the consistent with that of your computer.
3. Click <Receiving Card> to enter the interface as
shown in the left figure.
4. Click<Smart Settings> to set receiving card.
User Manual 18