Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HGLRC Zeus F735-VTX
Summary of Contents for HGLRC Zeus F735-VTX
- Page 1 Zeus F735-VTX STACK Manual www.hglrc.com...
-
Page 2: Table Of Contents
Voltage and current parameters setting.....................9 Setting up the receiver..........................10 VTX serial port use. VTX uses OSD smart audio................11 GPS parameters setting...........................12 Check receiver signal..........................13 Select flight mode startup mode......................14 OSD settings..............................15 LED settings..............................16 Troubleshooting............................17 ..................Package IncIuded Zeus F735-VTX stack*1 Accessory Package*1 www.hglrc.com... -
Page 3: Product Specifications
1.Product Specifications Product parameters Model Zeus F735-VTX stack Usage for 100mm-450mm Frame Kit Flight Controller F722 mini Flight Controller 35A BL32 3-6S 4in1 ESC MT VTX mini Black Box Support receiver SBUS .IBUS.DSMX Input Voltage 3-6S Lipo BEC Output 5V/3A Weight 18.4g... -
Page 4: Interface Description
2.Interface Description www.hglrc.com... -
Page 5: Check The Flight Control Drive
3.Check the flight control drive 1. Long Press BOOT buttons.connect USB.The system automatically install the driver 2.Driver cannot be installed, please download ImpulseRC_Driver_Fixer 3.Double-click on the run(Plug in the flight controller to automatically install the driver) 4.open betaflight configurator enter DFU mode ， www.hglrc.com... - Page 6 5.Click Select firmware version Load firmware Waiting for 6.Click completion It will be prompted upon completion 7. open betaflight configurator computer. Betaflight Automatically assigned port click “Connect” Enter Controller plugged into the setup interface（Different computer COM） ， www.hglrc.com...
-
Page 7: Calibration Accelerometer
4. Calibration accelerometer 1. Put the aircraft horizontal and click“Reset Z axis” Click again 5.URAT serial port use 1.URAT1 uses the receiver 2.URAT2 3.URAT3 uses VTX image transmission 4.URAT4 uses GPS 5.URAT6 uses ESC telemetry www.hglrc.com... -
Page 8: Select Aircraft Model
6.Select aircraft model Select model Click I understand the risks Click Click Push Master to check motor “ ” steering Master Steering can be changed at BLHeliSuite “ ” www.hglrc.com... -
Page 9: Choose Esc Protocol
1.Choose the right ESC protocol, the optional universal protocol DSHOT600. 8.Turn on ESC telemetry 1.Use BLHeli_32 ESC telemetry over a separate wire 2.Open ESC telemetry serial port.TX on the ESC needs to be connected to the RX6 on the flight controller to use the ESC telemetry www.hglrc.com... -
Page 10: Voltage And Current Parameters Setting
3.View telemetry data on OSD 9.Voltage and current parameters setting 1.Click Setting parameters www.hglrc.com... -
Page 11: Setting Up The Receiver
10.Setting up the receiver 1.Receiver connection diagram 2.Click have found UART1 Open the receiver serial port “ ” 3.Set the SBUS receiver www.hglrc.com... -
Page 12: Vtx Serial Port Use. Vtx Uses Osd Smart Audio
4.Set the PPM receiver 5.Set the DSMX receiver 11.VTX serial port use. VTX uses OSD smart audio 1.VTX connection diagram www.hglrc.com... - Page 13 Roll-right will enter the sub-menu. For example, in the screen to the right, moving the cursor to “Features” and then moving the roll stick to the right will enter the “Features” sub-menu. www.hglrc.com...
- Page 14 The screen to the right shows the current vTX settings. From here, you can change the frequency band, channel, and power level of the video transmitter. After making the changes, move the cursor to “Set” and press roll-right to confirm the settings. www.hglrc.com...
-
Page 15: Gps Parameters Setting
12.GPS parameters setting 1. GPS connection diagram 2.Open the GPS serial port www.hglrc.com... -
Page 16: Check Receiver Signal
3.When using the GPS function, remember to configure the serial port (via the Ports tab). 13.Check receiver signal Check the remote control output signal Click www.hglrc.com... -
Page 17: Select Flight Mode Startup Mode
Click channel (below are for reference only) 15.OSD settings the OSD Settings, according to the need to choose, drag Click the OSD schematic diagram of the parameters can be adjusted. www.hglrc.com... -
Page 18: Led Settings
● Keep focus on the polarity. Check carefully before power supply. ● Cut off the power when you connect, plug and pull anything. ● The refresh rate of PID and Gyroscope is up to 8K/8K. www.hglrc.com... - Page 19 "BBB" sound. There is only one sound. Please check if the ESC agreement is correct 3.The spin of the aircraft keeps spinning 1. Please check if the propeller is correct 2. Please check if the motor direction is correct www.hglrc.com...
Need help?
Do you have a question about the Zeus F735-VTX and is the answer not in the manual?
Questions and answers