Installation On A Mac Os X - FujiFilm Finepix S3000 Owner's Manual

Fujifilm finepix s3000: user guide
Hide thumbs Also See for Finepix S3000:
Table of Contents

Advertisement

6.3 INSTALLATION ON A Mac OS 9.0 TO 9.2
N
N
Note
i Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate
correctly if you use an extension cable or connect the camera via a USB hub.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software may not
operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i On Macintosh computers, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER LE is
used. If other applications will be used at the same time, allocate the additional amount required for those
applications also.
N
N
Enable File Exchange
Check whether File Exchange is active.
To use an xD-Picture Card that is supported by the camera, the File Exchange utility supplied with Mac OS must
be running.
Switch on your Macintosh and start up Mac OS 9.0 to 9.2.
1
G
!
Do not connect the camera to your Macintosh until the software installation is completed.
Select the Extension Manager in the Control Panel and check that the File Exchange check box is ticked.
2
If not, click in the box so that " " appears and then restart your Macintosh.
When you load the enclosed CD-ROM into the CD-ROM drive, the "FinePix" window automatically
3
opens.
G
!
If the "FinePix" window does not open automatically, double-click the CD-ROM icon.
Double-click "Installer for MacOS9" to launch the Installer.
4
86
The Installer setup screen appears. Click the [Installing
5
FinePixViewer] button.
G
!
For more information on what is installed, click the [Read Me First] button
and [Using FinePixViewer] button.
A confirmation message appears asking whether you want to continue with the installation.
6
Click the [OK] button.
The User License Agreement for this software is displayed. Read the agreement carefully and then, if
7
you agree to the terms of the Agreement, click the [Agree] button. If you click the [Disagree] button, the
software is not installed.
6
Continued
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents