Changing The Date Order; Checking The Remaining Batteries Charge; Selecting The Language - FujiFilm Finepix S3000 Owner's Manual

CHANGING THE DATE ORDER

ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＭＭ ＤＤ ＹＹＹＹ ＭＭ ＤＤ ＹＹＹＹ
９ １８ ２００３ ９ １８ ２００３
８ ： ５９ ＡＭ ８ ： ５９ ＡＭ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ ＢＡＣＫ ＢＡＣＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
1 0 0 2
1 Press " d " or " c " to select the date order.
2 Press " a " or " b " to set the date order. Refer
to the table below for details of the settings.
3
Always press the "MENU/OK" button after the
settings are completed.
Date order Explanation
YYYY.MM.DD Displays the date in the "year.month. day" format.
MM/DD/YYYY Displays the date in the "month/day/ year" format.
DD.MM.YYYY Displays the date in the "day.month. year" format.
20
CHECKING THE REMAINING
BATTERIES CHARGE
Switch the camera on and check that no battery
X C
level warning ( or ) is displayed on the
LCD monitor. If no icon is displayed, there is
ample charge left in the batteries.
i X Lit red:
Batteries charge low. Replace or recharge the
batteries as they will run out shortly.
i C Blinking red:
The batteries are exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the batteries.
G
3 0
!
Do not reuse batteries that have no remaining
charge (C blinking red) as this can result in faults
such as the camera switching off without retracting
the lens.
G
!
The above estimates are for the Still image modes.
In Playback mode, the transition from "X" to "C"
may take less time.
N N
Power Save Function
If the camera is not used for 2 minutes, this
function automatically switches it off.
When this function is enabled, the screen
switches off to conserve battery power if the
camera is not used in any way for 30 seconds
(See P.79 for details). To switch the camera
back on, turn the Power switch to "OFF" briefly
and then back to "q".

SELECTING THE LANGUAGE

1
ＯＰＴＩＯＮ ＯＰＴＩＯＮ
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＬＣＤ ＬＣＤ
0 1 0 3
1Press the "MENU/OK" button.
2Press "d" or "c" to select " g OPTION" and
then press "a" or "b" to select "SET–UP".
3Press the "MENU/OK" button.
2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ ２／２ ２／２
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＬＡＮＧＵＡＧＥ ＬＡＮＧＵＡＧＥ ＥＮＧＬＩＳＨ ＥＮＧＬＩＳＨ
ＶＩＤＥＯ ＳＹＳＴＥＭ ＶＩＤＥＯ ＳＹＳＴＥＭ ＮＴＳＣ ＮＴＳＣ
ＲＥＳＥＴ ＲＥＳＥＴ ＯＫ ＯＫ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ ＢＡＣＫ ＢＡＣＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 2 0 1 2 0
1Press "a" or "b" to select "LANGUAGE".
2Press "c" to select "ENGLISH", "FRANCAIS",
"DEUTSCH", "ESPAÑOL" or "
cycle through the language settings by
pressing "c".
3Press the "MENU/OK" button.
G
!
The screens in this manual are shown in English.
G
!
See P.78 for more information on the "
menu.
1
3 0
". You can
g
" OPTION
21