Installation On A Mac Os X - FujiFilm FinePix F40fd Owner's Manual

Installation on a Mac OS X

Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
1
Compatible Mac
*
Operating System
RAM
Hard disk space
Display
Internet connection
1
* PowerPC, Intel processor loaded
2
* Models with a USB port as a standard feature
3
* Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use
an extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
Downloaded From camera-usermanual.com Fujifilm Manuals
Power Macintosh G3
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, or Mac mini
Mac OS X (compatible with version 10.3.9 to 10.4.8)
256 MB minimum
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
800 × 600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)
• To use the FinePix Internet Service or mail attachment function:
3
An Internet connection or e-mail transmission software is needed
*
• Connection speed: 56 k or better recommended
2 2
, PowerBook G3 ,
* *
125