FujiFilm Finepix S3000 Owner's Manual page 51

7.1 CAMERA CONNECTION
3
Set a computer
Windows 98/98 SE/Me/2000 Professional/Macintosh
G
!
The Windows CD-ROM may also be required during installation. In this event, switch CD-ROMs as directed by the on-screen
instructions.
h FinePixViewer automatically starts up.
h A removable disk icon appears and you can use your PC to transfer files to and from the camera.
If the above operations do not occur, you do not have the required software programs or drivers installed on
your PC. Complete the required PC setup procedures. Then reconnect the camera to your PC.
100
✽ Screen for Windows 98 SE
Windows
Windows XP
1 The "Found New Hardware" help message appears in the bottom-
right corner of your screen. This message will close when the
settings are completed. No action is required.
G
!
This step is not required for subsequent connections.
2 Specify the settings in the "AutoPlay" dialog box.
h When FinePixViewer is included in the list of actions to perform
Select "Viewing images using FinePixViewer" and then select the "Always do the selected action"
checkbox. (This checkbox may not be shown in some cases.)
Click the [OK] button to launch FinePixViewer.
h When FinePixViewer is not included in the list of actions to perform
Select "Take no action" and then select the "Always do the selected action" checkbox. (This checkbox may
not be shown in some cases.)
Click the [OK] button and launch FinePixViewer manually.
Macintosh 3 A new removable disk icon appears in the "My Computer" window.
N
Regarding the Icons
The next time you connect the camera, the removable disk drive icon and name change to the "FinePix" icon and
name.
Proceed to "USING FinePixViewer" on P.104.
N
7
101