5
Preliminary on-site checkout
Normal startup sequence
When you power on or reboot the ColorPASS, the system runs the following startup
routine on the Control Panel. The routine takes approximately 2-5 minutes to reach the
Idle screen. If the system hangs or data is missing during the startup sequence, note the
screen displayed and then check Figure 5-3 on page 5-11 for the possible problems and
suggested actions.
Code in motherboard BIOS tests, initializes,
and configures areas on the motherboard.
Backlighting
Version of UIB
firmware is
displayed
Normal startup sequence
F
5-3
IGURE
Power on
xx.xx.xx
System software on the HDD
completes startup process
Booting ...
xx.xx.xx
Server Name
Please wait
54744MB
X.0
Info
Server Name
Idle
54744MB
X.0
Info
5-11