Wireless Client - Tenda W303R User Manual

wireless network; all other wireless devices will forbidden.
Step1. Select the wireless network (SSID) you wish to enable Access Control
on.
Step2. Select Permit from the corresponding drop-down menu.
Step3. Enter the MAC address you wish to permit in the MAC address box
and click Add.
Step4. Click OK to save your settings. You can add more wireless MAC
addresses you wish to allow.
Example: To forbid the PC at the MAC address of C8:3A:35:65:82:E6 from
connecting to your wireless network, do as follows:
Step1. Select an SSID, say, Tenda_home.
Step2. Select Forbid (or Deny) from the corresponding drop-down menu.
Step3. Enter C8:3A:35:65:82:E6 in the MAC address box and click Add.
Step4. Click OK to save your settings. You can add more wireless MAC
addresses you wish to forbid.

4.4 Wireless Client

Here you can see a list of wireless devices connected to the router, including
their MAC addresses and bandwidth
Wireless N300 Home Router
48