Oracle MICROS 110 Assembly page 15

Secure the Kiosk to the Floor
To prevent tipping and to ensure stability, the Oracle MICROS Kiosk 110 must be firmly secured to the floor. To facilitate this, there
are two holes in the floor mounting plate. The holes can accommodate bolts up to 9/16 or ~.56 inch in diameter with countersunk
heads up to 1 inch in diameter.
•
Oracle MICROS does not supply the fasteners to mount the kiosk. Use fasteners appropriate for the floor material onto
which the kiosk will be installed.
•
The floor material must be solid and crack free with a smooth, level surface.
•
Ensure the heads of the bolts are not tall enough to become a tripping hazard.
Apply Stickers
Required: Apply the Caution Shock Hazard sticker to lower rear of stand, as shown in the following image:
Floor mounting plate with two holes. A thin cap covers each hole.
15