Step 5
You will need
4 x Cam Nuts
Phillips Head
(H4)
Screwdriver
Insert 4 x Cam Nuts (H4) into the holes of Rails (P5). Rotate the cam nuts so the arrow points
towards the incoming cam bolts. Attach Rails (P5) to Divider (P7) by tightening with the Phillips
Head Screwdriver.
Step 6
You will need
4 x Screws
Phillips Head
(H2)
Screwdriver
Attach Rails (P8 & P9) to Divider (P7) with 4 x Long Screws (H2) by tightening with the
Phillips Head Screwdriver.
fantasticfurniture.com.au
(P5)
(P7)
(P7)
(P5)
(P8)
(P9)
Page 7