fantastic furniture Hamilton Dresser 6 Drawer Manual page 6

Step 3
You will need
18 x Small 3 x CL Runner
Screws (H5) Tracks (H6)
3 x CR Runner 4 x Cam Bolts
Tracks (H7) (H3)
Phillips Head
Screwdriver
Attach 3 x CL RunnerTracks (H6),
3 x CR Runner Tracks (H7) and 4 x
Cam Bolts (H3) to Divider Panel (P7) with
18 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
Step 4
You will need
1 x Dowels 1 x Cam Bolts
(H1) (H3)
1 x Cam Nuts Phillips Head
(H4) Screwdriver
Attach 1 x Cam Bolt (H3) into
Bottom Rail (P6). Insert 1 x Dowel (H1)
into Top Rail (P4) and 1 x Cam Nut
(H4) into Divider (P7) as shown.
Rotate the cam nuts so the arrow
points towards the incoming cam bolts.
Attach Rails (P4 & P6) to Divider (P7) by
tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au fantasticfurniture.com.au
H5
CR
H7
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Cam Nut hole
nearby bottom
(P4)
(P7)
H5
FLIP
H6
(P7)
(P7)
(P6)
Page 6
CL