Table of Contents
Advertisement
3.4 Channel-zero Encoding
Purpose:
Sometimes you need to get a remote view of many channels in real time from web browser or CMS (Client
Management System) software, in order to decrease the bandwidth requirement without affecting the image quality,
channel-zero encoding is supported as an option for you.
Steps:
1.
Enter the Live View Settings interface.
Menu > Configuration > Live View
2.
Select the Channel-Zero Encoding tab.
3.
Check the checkbox after Enable Channel Zero Encoding.
4.
Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
After you set the Channel-Zero encoding, you can get a view in the remote client or web browser of 16 channels in
one screen.
Network Video Recorder User Manual
Figure 3. 10 Live View- Channel-Zero Encoding
51
Advertisement
Table of Contents
