Table of Contents
Advertisement
2.1.5 Resetting Your Password
When you forget the password of the admin, you can reset the password by importing the GUID file. The GUID
file must be exported and saved in the local U-flash disk after you have activated the device (refer to Chapter
2.1.2Activating Your Device).
Steps:
1.
On the user login interface, click Forget Password to enter the Reset Password interface.
Please insert the U-flash disk stored with the GUID file to the NVR before resetting password.
2.
Select the GUID file from the U-flash disk and click Import to import the file to the device.
If you have imported the wrong GUID file for 7 times, you will be not allowed to reset the password for 30
minutes.
3.
After the GUID file is successfully imported, enter the reset password interface to set the new admin
password.
4.
Click OK to set the new password. You can export the new GUID file to the U-flash disk for future password
resetting.
When the new password is set, the original GUID file will be invalid. The new GUID file should be exported for
future password resetting. You can also enter the User>User Management interface to edit the admin user and
export the GUID file.
2.2 One-touch Adding IP Camera
When the NVR starts up and enters the Wizard, you can add the IP camera in a smart and fast way.
Network Video Recorder User Manual
Figure 2. 15 Reset Password
28
Advertisement
Table of Contents
