Table of Contents
Advertisement
MAINTENANCE
Urinal Repair
,
When repairing, you don t have to dismount the sensor.
Cover the sensing window with tape and work with ease.
,
NOTE Don t
:
use very adhesive tape in case the scar
will be hard to remove.
Clean the Filter Screen
If the flushing volume reclines sharply after installation or
used for a long time with no cause from water pressure, the
filter may need a wash. Please operate as following steps:
After turning anticlockwise the adjusting bolt with hex wrench to
close the valve, turn off the fixed cap with screw driver. Take out
the valve-core filter assy. and clean with a brush and reinstall
them.
NOTE:
Turn off the water supply or tighten the
adjusting bolt before cleaning.
Do not disassemble the fixed screw
during the operations.
初装或使用较长时间后，如发现出水量明显变小，而非水压原
因，可进行以下操作：
用内六角扳手将调节栓顺时针方向旋紧后，用十字螺丝刀逆时针
方向旋开螺钉并取下阀芯滤网组件，刷洗干净后重新装入即可。
注意：
清洗前，请先关闭水源或拧紧调节栓。
操作过程中，请勿拆分内六角螺钉。
Care & Clean
Keep the sensing window clean. Wipe with soft cloth and mild
cleaner.
NOTE:
a. Do not use dust-removing powder, abrasive powder
or cleaner containing oil, acid or alkaline ingredient.
b. Do not spray air-refresher, disinfector, or other
deodorizing, cleaning solvent directly into the
sensing window.
,
c. Don t attack the sensor window.
1206437-T01-A
维护保养
修理小便器
修理小便器时，不必拆下感应器，只需要用电工胶布粘住
感应窗口，您便可放心修理设备。
注意：不要用强力胶布，因为粘痕会难以清除。
清洁保养
保持窗口清洁，可用蘸有中性清洁剂的软布擦洗。
注意：
a. 禁止使用去污粉、研磨粉及油类、酸性类、碱性类清
洁剂。
b. 禁止直接对感应窗口喷洒空气清新剂、消毒液或其他
除臭、清洁类有机溶剂。
c. 勿撞击感应窗口。
2.5mm Hex Pan
2.5mm内六角扳手
Screw
螺钉
Filter
滤网
11
Advertisement
Table of Contents
