Page 1
Watertile Showerhead Installation and User Guide MODEL NUMBERS 8022A, 8023A Important! Please quote the above model number(s) when ordering spares IMPORTANT INSTALLER: THIS MANUAL IS THE PROPERTY OF THE CUSTOMER AND MUST BE RETAINED WITH THE PRODUCT FOR MAINTENANCE AND OPERATIONAL PURPOSES.
BEFORE YOU BEGIN All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. Please leave these instructions for the consumer.
Page 3
Make sure that the Watertile showerhead is installed by a competent installer. Before installation carefully inspect the new fixture for any signs of damage. Kohler Co. reserves the right to make revisions in the design of products without notice. Install the Pipe and Elbow...
Page 4
Install the Watertile Showerhead Apply Silicone Sealant Prepare the Housing: Position the housing so that the back of the leak shield is facing you. Apply a bead of silicone sealant in the groove around the outside of the housing. Do not apply silicone sealant in or near the weep hole.
Page 5
Finish the Installation With the ribs of the sprayhead facing up, attach the sprayhead to the waterway. Waterway Using a 3/16” hexagonal key, secure the sprayhead to the waterway with the Sprayhead 2 securing screws (supplied). Do not Hex Screws overtighten.
CARE AND CLEANING Like anything of lasting quality, Kohler tapware and fittings require a certain amount of periodic care to preserve their lustrous finish. Clean your new Kohler tapware and fittings with a mild soap, rinse thoroughly with warm water and dry with a clean, soft cloth.