Table of Contents
Advertisement
10.
Device settings
10.1 Device settings expert mode
Device settings can be made on the web server of the DEHNrecord SD itself, via Modbus or via the cloud. For easy operation, some more
complex setting options are hidden by default. If the expert mode is activated, all setting options can be displayed.
10.2 General
In addition to a description, the path for the configuration of power quality parameters can be specified here.
Path for PQ configuration
Modbus
Cloud
10.3 LED indicator
The display of LED 2 (Status) can be configured individually. The following options are available for this purpose:
Configuration LED 2 (Status)
PQ status standard
PQ status individual
POP display
Input 1
Input 2
Input 3
Off
Limit values can be set via the Modbus
Limit values can be set via the cloud
green
OK
Event occurred
OK
Event occurred
OK
Event occurred
"0"
-
Comment
yellow
Violation of a limit value
Violation of a limit value
"1"
-
Page 36 from 69
red
-
-
-
-
-
Advertisement
Table of Contents
