Table of Contents
Advertisement
8.
Commissioning
8.4
Step 4 – Configuration
The DEHNrecord SD can be configured appropriately via the web server.
Instructions for device settings can be found in chapter 10.
Access to the cloud server is preconfigured (MQTT, port 8883).
LED 1 (Device) lights up permanently green as soon as access to the DEHNmonitor PQ is working.
Product registration
For successful product registration at DEHNmonitor PQ (www.dehn.de/powerquality-monitor),
the four digits after the serial number are required in addition to the serial number.
These are only printed on the DEHNrecord SD itself!
Example: "0000" in "FHA12345678-0000"
Page 29 from 69
Advertisement
Table of Contents
