10.
Device settings
The digital output responds to various internal or external event sources.
The following options are available as sources:
Source
Reaction to
Off
-
Input 1
Event at digital input 1, behavior of the input adjustable
Input 2
Event at digital input 2, behavior of the input adjustable
Input 3
Event at digital input 3, behavior of the input adjustable
Detection of a power frequency overvoltage or individually defined voltage
POP function
(see chapter "power frequency overvoltages (POP)")
PQ standard
Violation of a PQ limit according to EN 50160
PQ individual
Violation of a PQ limit according to individual set of limit values
Impulse
Violation of an impulse limit*
Energy/current
Events caused by the current and energy measurement (see chapter 10.6 current measurement)
Events generated by the DEHNrecord SD itself, such as cloud connection established or action by pressing a button
Device
on the device (Action 1, Action 2), firmware update successfully performed, ...
Cloud2Device
A command controlled from the cloud
Logic
Digital output functions as output of the LOGIC function
* Variant with impulse current measurement expected to be available from Q4 - 2021
Page 39 from 69