Table of Contents
Advertisement
10.
Device settings
Logic
The internal logic module has four inputs and one output.
These can be configured individually and the function of the logic module can also be set.
Input 1, 2 and 3 designate the digital inputs of the DEHNrecord SD.
Input 4 represents an internal event source.
IN 0
IN 1
IN 1
IN 2
LOGIC
function
IN 3
IN 3
internal
IN 4 (int. source)
event
To link output 1 or 2 with the logic, select "Logic" as the source under the setting for the respective output.
Parameter
Function
Input 1, 2 and 3 (digital inputs)
Input 4 (internal source)
* Variant with impulse current measurement expected to be available from Q4 - 2021
U
in V
N
OUT 0 /
OUT 1 / 2
OUT 1
a)
OFF, AND, OR, XOR, NOR, NAND, XNOR
off, normal, inverted
off, POP, PQ standard, PQ individual, impulse*, energy/current, device
b)
Values
Page 40 from 69
Advertisement
Table of Contents
