4.2
Complete device
Only complete phase comparators (coupling ele-
ment with indicator and test prod as well as in-
sulating stick with handle) may be used for phase
comparison. The phase comparator may only be
used in combination with the insulating stick indi-
cated on the rating plate.
Note: The insulating length is the distance bet-
ween the limit mark (red ring) and the hand gu-
ard on the handle.
4.3
Assembly
The insulating stick with handle (hexagon pin) is
plugged into the coupling element of the test prod
and firmly tightened using the fixing screw of the
coupling element.
red ring
coupling
element
Fig. 3
Complete device
contact electrode
test electrode
test prod
fixing screw
insulating stick
handle
9