Table of Contents
Advertisement
10.
Device settings
10.5 Network
Network settings can only be made in the web server of the DEHNrecord SD. Saved changes are applied after a restart of the device.
A connection to a time server (SNTP) is required for the intended use of DEHNrecord SD.
The addresses and ports required for this must not be blocked in the network. The ports are listed in chapter 9.5 "Communication via the
network".
Parameter
DHCP
DNS Server 1 (IP of the DNS server for static settings)
DNS Server 2 (IP of the DNS server for static settings)
Static IP (if DHCP is disabled)
Static IP gateway (if DHCP is disabled)
Static IP netmask (if DHCP is disabled)
Time server 1 (SNTP)
Time server 2 (SNTP)
Time server 3 (SNTP)
Time server 4 (SNTP)
Device name (the name under which the device is visible in the network
if DHCP is activated)
MAC adress
Timeout web server (time in seconds after the web server is deactivated)
Setting range
on/off
0.0.0.0 ... 255.255.255.255
Not adjustable
Not adjustable
120 ... 3600 s
Page 41 from 69
Default value
off
8.8.8.8
1.1.1.1
169.254.0.10
0.0.0.0
255.255.0.0
de.pool.ntp.org
ptbtime1.ptb.de
ptbtime2.ptb.de
ptbtime3.ptb.de
DRC-SD-FHAxxxxxxxx
(FHAxx... = Serial number)
Device-dependent
600 s
Advertisement
Table of Contents
