Installation; Figure 13 Bolt Removal; Figure 14 Hand Release Yoke Attachment - KEB COMBISTOP 38 Instruction Manual

Optional Components and Accessories

5.1.1 Installation

1. Using a 17mm wrench/socket, remove the two standard bolts (1) from the magnet
assembly as shown above.
2. Mount the hand release yoke (2) to the magnet using the spherical bolts and washers
included with the kit as shown below.
3. Tighten the bolts to 60Nm with a 13mm wrench/socket.
4. Screw the hand release handle (3) to the yoke, ensuring a tight fit.
2021 KEB America, Inc.
©

Figure 13 Bolt Removal

Figure 14 Hand Release Yoke Attachment

31