Cleaning, Maintenance And Replacement Parts - Deda Elementi Gera Alloy Use And Maintenance Manual

9. Cleaning, maintenance and replacement parts

The wheels you have just purchased are high
technology products that require specific care
and maintenance to fully obtain the maximum
performance advantages and to preserve them
over time. So we recommend to follow simple
rules of use to avoid any kind of problem.
Warning:
Never clean the wheels and parts using high
pressure and/or high temperature water.
The water pressure can overcome seals and
bearings protections systems causing damages
irreparably or malfunction of internal parts of
the hub. Never use solvents, chemical products,
petrol or similar substances, over the hubs that
can damage seals and rubber gaskets or remove
the grease from the bearings completely.
After the bicycle washing, dry every parts and
components avoiding to store water into the
hollow points of the wheel (for instance inside the
rim and hub). Frequently check the wear status
of the wheels parts and if necessary make the
maintenance and/or parts replacement through
the official Deda Elementi dealers.
The recommended maintenance intervals
depend on the use and using condition of the
wheels. It is recommended to make an inspection
after each riding season or every time in case of
problems related to bearing, wheel out of center
or damages to single parts.
Since specific tools and experience are necessary
for hub maintenance, wheel truing or parts
replacement it is recommended that the service
should be done by official Deda Elementi dealer.
For any intervention or replacement parts, only
original Deda Elementi spare parts have to be
used in order to guarantee the product quality
and the warranty maintaining.
Wheels Gera Alloy 25