Time Settings; Auto Time Updating; Table 21: Email Log; Figure 58: Email Logs - Grandstream Networks UCM6206 User Manual

Field
Start Time
End Time
Receivers
Send Result
Return Code
Email Send Module
Email logs will be shown on bottom of The "Email Send Log" page, as shown on the following figure.

Time settings

Auto time updating

The current system time on the UCM6200 is displayed on the upper right of the web page. It can also be found
under Web GUI->Status->System Status->General.
To configure the UCM6200 to update time automatically, go to Web GUI->Settings->Time Settings->Time Auto
Updating.

Table 21: Email Log

Description
Enter the start time for filter
Enter the end time for filter
Enter the email recipient, while searching for multiple recipients, please
separate then with comma and no spaces.
Enter the status of the send result to filter with
Enter the email code to filter with
Select the email module to filter with from the drop down list, which
contains:
All Modules
Extension
Voicemail
Conference Schedule
User Password
Alert Events
CDR
Fax
Test

Figure 58: Email Logs

UCM6200 Series User Manual
P a g e | 81