Table 10: Ucm6200 Network Settings->802.1X; Figure 29: Ucm6200 Using 802.1X As Client; Figure 30: Ucm6200 Using 802.1X Eap-Md5 - Grandstream Networks UCM6206 User Manual

The following table shows the configuration parameters for 802.1X on UCM6200. Identity and MD5 password
are required for authentication, which should be provided by the network administrator obtained from the
RADIUS server. If "EAP-TLS" or "EAP-PEAPv0/MSCHAPv2" is used as the 802.1X mode, users will also need
to upload 802.1X CA Certificate and 802.1X Client Certificate, which should be also generated from the RADIUS
server.
802.1X Mode
Identity
MD5 Password
802.1X Certificate

Figure 29: UCM6200 Using 802.1X as Client

Figure 30: UCM6200 Using 802.1X EAP-MD5

Table 10: UCM6200 Network Settings->802.1X
Select 802.1X mode. The default setting is "Disable". The supported 802.1X mode
are:
•
EAP-MD5
•
EAP-TLS
•
EAP-PEAPv0/MSCHAPv2
Enter 802.1X mode identity information.
Enter 802.1X mode MD5 password information.
Select 802.1X certificate from local PC and then upload.
UCM6200 Series User Manual
P a g e | 57