Model Update; Figure 80: Template Management - Grandstream Networks UCM6206 User Manual

•
Click on to delete the model template or click on "Delete Selected Templates" to delete multiple selected
templates at once.
•
Click on "Toggle Selected Template(s)" to toggle the status between enabled/disabled for the selected model
templates.

Model Update

UCM6200 zero config feature supports provisioning all models of Grandstream SIP end devices. Templates for
most of the Grandstream models are built in with the UCM6200 already. Templates for GS Wave and
Grandstream surveillance products require users to download and install under web UI->PBX->Zero Config-
>Model Update first before they are available in the UCM6200 for selection. After downloading and installing
the model template to the UCM6200, it will show in the dropdown list for "Model" selection when editing the
model template.
•
Click on to download the template.
•
Click on to upgrade the model template. Users will see this icon available if the device model has
template updated in the UCM6200.
In case the UCM6200 is placed in the private network and Internet access is restricted, users will not be able to
get packages by downloading and installing from the remote server. Model template package can be manually
uploaded from local device through web UI. Please contact Grandstream customer support if the model package

Figure 80: Template Management

UCM6200 Series User Manual
P a g e | 110