Use The Led Indicators; Use The Web Gui; Access Web Gui; Table 4: Ucm6202/Ucm6204 Led Indicators - Grandstream Networks UCM6206 User Manual

Web Info
SSH Switch

Use The LED Indicators

The UCM6200 has LED indicators in the front to display connection status. The following table shows the status
definitions.
LED Indicator
LAN
WAN
USB
SD
FXS (Phone/Fax)
FXO (Telco Line)
LED
NETWORK
ACT
USB
SD
Phone (FXS)
Line (FXO)

Use The Web GUI

Access Web GUI

The UCM6200 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages
allow users to configure the device through a Web browser such as Microsoft IE, Mozilla Firefox, Google Chrome
and etc.
factory testing purpose which verifies the hardware connection inside the
device. The diagnostic result will display in the LCD after the test is done.
•
Protocol: Web access protocol. HTTP or HTTPS. By default, it's HTTPS
•
Port: Web access port number. By default it's 8089
•
Enable SSH: Enable SSH access.
•
Disable SSH: Disable SSH access.
By default the SSH access is disabled.

Table 4: UCM6202/UCM6204 LED Indicators

LED Status

Table 5: UCM6208 LED Indicators

LED Status
UCM6200 Series User Manual
Solid: Connected
Flashing: Data Transferring
OFF: Not Connected
Solid: Connected
OFF: Not Connected
Solid: Connected
Flashing: Data Transferring
OFF: Not Connected
P a g e | 34