Yamaha CX-A5200BL Owner's Manual page 48

MAIN 2 3 4 MAIN 2 3 4
SLEEP SLEEP ZONE ZONE
PARTY T T PARTY PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT INPUT
TUNER TUNER NET NET USB USB BLUETOOTH BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
ENTER
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU /MENU / / MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING
(when angle/height measurement is enabled)
Proceed to Step 2.
2
Perform the angle/height measurement.
1
Attach the supplied pole to the center of the microphone base.
Pole
Microphone base
2
3
4
48
En
Place the microphone base at the listening position and set the
YPAO microphone to the position "1".
Y
• We recommend using a tripod to place the microphone base at ear height.
Use the tripod screws to fix the microphone base in place.
• Do not move the microphone base until the fourth angle measurement
finishes.
Press ENTER to start the first angle measurement.
In the same way, perform the angle measurement for the
positions "2" and "3".
Microphone
base