Yamaha CX-A5200BL Owner's Manual page 134

Contrast
Adjusts the video contrast.
Setting range
-100 to 0 to +100
Saturation
Adjusts the video saturation.
Setting range
-100 to 0 to +100
■ HDMI Control
Configures the HDMI control settings.
HDMI Control
Enables/disables HDMI Control (p.172).
Settings
Off Disables HDMI Control.
Enables HDMI Control.
On
Configure the settings in "TV Audio Input", "ARC" and "Standby Sync".
Y
To use HDMI control, you need to perform the HDMI Control link setup (p.172) after connecting HDMI
Control-compatible devices.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when "HDMI Control" is set
to "On". The unit's input source automatically switches to TV audio when the TV input is
switched to its built-in tuner.
Settings
AUDIO 1-3
Y
When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an
external device because the input will be used for TV audio input.
ARC
Enables/disables ARC (p.174) when "HDMI Control" is set to "On".
Settings
Off Disables ARC.
On Enables ARC.
Y
You do not need to change this setting normally. In case noises are produced from the speakers connected to the
unit because TV audio signals input to the unit via ARC are not supported by the unit, set "ARC" to "Off" and use
the TV's speakers.
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the unit when
"HDMI Control" is set to "On".
Settings
Off Does not set the unit to standby mode when the TV is turned off.
On Sets the unit to standby mode when the TV is turned off.
Sets the unit to standby mode when the TV is turned off only when the unit is
Auto
receiving TV audio or HDMI signals.
■ HDMI Audio Output
Selects whether the HDMI sound is output from the TV speakers.
X
The "HDMI OUT1" setting is available only when "HDMI Control" is set to "Off".
HDMI OUT1, HDMI OUT2, HDMI ZONE OUT
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack, HDMI OUT 2
jack or HDMI ZONE OUT.
Settings
Off Disables the audio output from the TV.
On Enables the audio output from the TV.
Y
The HDMI OUT 1-2 jacks output 2-channel audio signals when the unit is turned on.
134
En