Video/Hdmi - Yamaha CX-A5200BL Owner's Manual

Video Video Mode (p.132), Video Adjustment (p.113)
Volume Master Volume (p.63)
Lipsync Lipsync (p.111), Delay (p.126)
Speaker Setup Setting Pattern (p.121), Parametric EQ (p.124)
Zone Interlock Power (p.103), Input (p.103), Volume (p.103) *1, 2
*1 The "Volume" setting is not available with Zone4.
*2 For "Volume", the "Initial Volume" setting in the "Multi Zone" menu has priority.
X
To restore the default settings for the selected scene, select "Reset".
■ Scene Rename
Changes the SCENE name displayed on the front display or on the TV.
■ Procedure
1
Use the cursor keys to select the SCENE name and press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename.
X
To clear the entry, select "CLEAR".
3
Use the cursor keys to select "SAVE" and press ENTER.
X
To restore the default setting, select "RESET".
4
To exit from the menu, Press SETUP.

Video/HDMI

Configures the video/HDMI settings.
■ Information
Displays information about the current video signal and the TVs connected to the HDMI OUT
jacks.
Choices
HDMI Signal Presence or absence of HDMI signal input/output
HDMI Resolution Resolutions of input signal (analog or HDMI) and output signal (HDMI)
HDMI Monitor
Resolutions supported by the TV
Video Resolution
■ Video Mode
Configures the video signal processing settings.
Video Mode
Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).
Settings
Direct Disables the video signal processing.
Enables the video signal processing.
Processing
Configure the settings in "Resolution", "Aspect" and "Adjustment".
X
When "Video Mode" is set to "Direct", the unit transmits video signals with the least circuitry in order to reduce
video output delay.
132
En