Selecting The Input Source And Favorite Settings With One Touch (Scene); Registering A Scene - Yamaha CX-A5200BL Owner's Manual

MAIN 2 3 4 MAIN 2 3 4
SLEEP SLEEP ZONE ZONE
PARTY T T PARTY PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE
1 2 3 4
SCENE
5 6 7 8
INPUT INPUT
TUNER TUNER NET NET USB USB BLUETOOTH BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
ENTER
RETURN
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU / / MENU /MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING

Selecting the input source and favorite settings with one touch (SCENE)

The SCENE function allows you to select the assigned input source,
sound program, HDMI output and various settings with just one touch.
You can use up to 8 scenes to register your favorite settings and switch
them depending on a playback source.
1
Press numbered key (1 to 8), and then the input source
and settings registered to the corresponding scene are
directly selected. The unit turns on automatically when it
is in standby mode.
Alternatively, you can also select a registered scene by
pressing SCENE repeatedly.
The SCENE name appears on the front display and on the TV.
2
To select a desired SCENE name, press ENTER.
Y
• To cancel the operation of selecting a registered scene, press RETURN.
• The operation is canceled automatically when you have not operated the unit
for the 30 seconds.
By default, the following input settings are registered for each scene.
Main Zone, Zone2 and Zone3
SCENE 1 2
Input AV1 TUNER
SCENE 5 6
Input AV2 AV3
Zone4
SCENE
Input
SCENE
Input
X
• You can check the detailed settings of each scene from the "Scene Setting" screen
(p.131) in the "Setup" menu.
• You can also register and recall SCENE 1-4 with the SCENE key on the unit's front
panel.

Registering a scene

1
Set the unit to the condition (such as input source and
sound program) that you want to assign to a scene.
2
Hold down the desired numbered key (1-8) until "SET
Complete (Setting Complete)" appears on the front
3 4
display and on the TV.
AUDIO2 NET RADIO
X
7 8
• You can configure more detailed scene assignments in "Scene Setting" in the "Setup"
AUDIO 1 SERVER
menu. For details, see "Scene Setting" (p.131).
• You can change the SCENE name displayed on the front display or on the TV. For
details, see "Scene Rename" (p.132).
64
En
1 2 3
AV1 AV2 AV3
5 6 7
AV5 AV6 AV7
SCENE1
VOL.
SET Complete
L C R
SL SW1 SR
SBL SBR
4
AV4
8
AV1