Honeywell SILENT KNIGHT Farenhyt Series Installation And Operation Manual page 21

Model RPS-1000 Installation Manual
3. Configure the RPS-1000 module by adding it to the system (through JumpStart or manu-
ally). You can also assign a name to the module. These procedures are described in the
IFP-1000 Installation Manuals (PN 151139) or IFP-1000ECS Installation Manual (PN
151460).
(FACP SBUS)
RPS-1000 Terminals 30-33 are used only for
connection RPS-1000 to the FACP or to the
controlling RPS-1000
Use 5895XL Terminals 16-19 to connect other
SBUS modules (5815XL, RA-1000, 5824) and to
daisy-chain RPS-1000's
RPS-1000 Board
(RPS-1000-1)
Figure 3-3 Class B RPS-1000 Connection to FACP
Figure 3-4 Class A RPS-1000 Connection to FACP
RPS-1000 Board
(RPS-1000-2)
3-3
151153
To next RPS-1000
and other SBUS
modules.
See Figure 3-6 for
SBUS Module
Connections