Trip 2; General Info - KTM 890 DUKE 2021 Owner's Manual

7 COMBINATION INSTRUMENT
7.16.3
7.16.4
30

Trip 2

H02857-01

General Info

V01111-01
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until the Trips/Data menu is
marked on the display. Press the SET button to open the menu.
–
Press the UP or DOWN button until the Trip 2 menu is marked
on the display. Press the SET button to open the menu.
Trip 2 shows the distance since the last reset, such as between two
refueling stops. Trip 2 is running and counts up to 9999.
ØConsumption2 indicates the average consumption based on Trip 2
and Trip time 2.
ØSpeed2 indicates the average speed based on Trip 2 and
Trip time 2.
Trip time 2 shows the journey time on the basis of Trip 2 and runs
as soon as a speed signal is received.
Fuel range indicates the possible distance you can cover with the
fuel reserve.
In the Trip 2 menu all entries apart from
Press and
Fuel range are deleted.
hold the but-
ton for 3–5
seconds.
Warning
Danger of accidents The tire pressure monitoring sys-
tem does not eliminate the necessity to check the tires
before going on a ride.
To avoid false alarms, the tire pressure values are
evaluated over a period of several minutes.
–
Check the tire pressure before every ride.
–
Correct the tire pressure if the tire pressure devi-
ates from the specified value.
–
Even if the tire pressure values are correct, stop
the vehicle immediately if its behavior indicates a
loss of pressure in the tires.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until the Trips/Data menu is
marked on the display. Press the SET button to open the menu.
–
Press the UP or DOWN button until the General Info menu is
marked on the display. Press the SET button to open the menu.
Date shows the date.
Odometer shows the total distance covered.
Battery indicates the battery voltage.
Tire press fron (optional) indicates the tire pressure at the front.
Tire press rear (optional) indicates the tire pressure at the rear.