10.6
Quickshifter + (optional)
10.7
Shifting, riding
Warning
Danger of accidents Abrupt load alterations can cause the vehicle to get out of control.
–
Avoid abrupt load alterations and sudden braking actions.
–
Adapt your speed to the road conditions.
Warning
Danger of accidents If you change down at high engine speed, the rear wheel blocks and the engine
races.
–
Do not change into a low gear at high engine speed.
Condition
The TRACK riding mode (optional) is activated.
First gear is engaged.
The TC indicator lamp does not light up.
Coolant temperature: > 60 °C (> 140 °F)
Total riding distance covered: > 1,000 km (> 620 mi)
–
Activate launch control in the combination instrument.
The number of available starts is indicated on the start
screen.
H02000-01
–
Apply full throttle with the clutch lever pulled.
The engine speed is adjusted.
9,000 rpm
The TC indicator lamp flashes quickly.
–
Release clutch lever quickly but in a controlled manner.
If the quickshifter + is activated, you can shift up and down with-
out actuating the clutch.
Because there is no need to close the throttle grip, uninterrupted
gear shifts are possible.
The quickshifter + uses the shifter shaft position to check whether
or not a shift should be initiated, and sends a corresponding signal
to the engine control.
If the quickshifter + is disabled in the combination instrument,
the clutch needs to be actuated in the normal way for each shift.
V01270-10
RIDING INSTRUCTIONS 10
53