Changing The Fuses Of Individual Electrical Power Consumers - KTM 890 DUKE 2021 Owner's Manual

16.7

Changing the fuses of individual electrical power consumers

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
Preparatory work
–
Remove the passenger seat. (
Main work
–
Open fuse box cover
V01207-10
–
Remove the faulty fuse.
Guideline
Fuse 1 - 10 A - ignition
Fuse 2 - 10 A - ignition, engine control unit, electronic fuel
injection, fuel vapor retention system, lambda sensor, immo-
bilizer/alarm system
Fuse 3 - 10 A - fuel pump
Fuse 4 - 10 A - radiator fan
V01208-10
Fuse 5 - 10 A - horn, combination instrument, brake light
Fuse 6 - 10 A - high beam, low beam, position light, tail
light, license plate lamp
Fuse 7 - 10 A - ACC1
Fuse 8 - 15 A - ACC2, HCU (optional)
Fuse 9 - 10 A - ABS control unit, diagnostics connector, 5D
sensor, TPMS (optional)
Fuse 10 - 10 A - light control unit
Fuse SPARE - 10 A/15 A - spare fuses
Info
A faulty fuse has a burned-out fuse wire
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
ELECTRICAL SYSTEM 16
p. 66)
1
.
A
p. 124)
.
95