E-Log (Error Code Log) - Henny Penny LOV LVE-102 Technical Manual

4-1. ADVANCED PRODUCT
SETTINGS (Continued)

4-2. E-LOG (error code log)

Feb. 2011
8. Press button until "FULL HT" shows in display along
with full heat value in seconds, which means the heat is on
as soon as a timer button is pressed, for programmed length
of time. Press product buttons
to change this value of 0 to 90 seconds.
9. Press button until "PC FACTOR" shows in display
along with proportional temperature, which helps to keep
oil from over-shooting setpoint temperature. Press product
buttons
0 to 50 degrees.
• Use button to go back to previous menu items.
• Press X button when finished with the current product, to
return to the PRODUCT SELECTN step.
• Press X button a second time to exit PROD COMP mode.
1. Press and hold
shows in the display, followed by ENTER CODE.
2. Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD"
and "COMP" show in the displays.
3. Press button and "E-LOG" shows in the display.
4. Press right √ button and "A" plus the present date & time
flashes on the display, along with "*NOW*".
5. Press and if an error was recorded, "B" and date, time,
and error code information shows in display. This is the
latest error code that the controls recorded.
6. Press and next latest error code information can be
seen. Up to 10 error codes (B to K) can be stored in
E-Log Section.
Press and hold right √ button to view a brief
description of the error.
4-2
Model LVE-102, 103, 104
to change this value of
and buttons until LEVEL - 2