Table of Contents
Advertisement
注：
以上是進入方法，具體參數號代表的參數意思詳情如下：
System parameters entering analysis:
Together touch
enter the adjustment).
Together touch
After entering the system parameters number can be seen, hen you can use (
to switch the parameter number, when you find the need modify number, then touch （
the current parameters, touch (
save the modification and exit. Or you can touch (
to modify. Method of operation is the same with up. After change finish, should be touch (
modification, otherwise Otherwise modify the parameters will be invalid.
Note: the up entry method, specific parameters No. on behalf of the parameters meaning as follows:
要修改的編號前按（
對當前參數進行加減操作。
修改完畢參數後需要按（
節 。或按（
）鍵退回上一個頁面進行其他參數修改。操
做方法和上面一樣。 操作完畢後必須按（
否則修改的參數將會是無效。
and
and
)(
) to adjust it. After finish modification then touch () to save the
）鍵，將進入當前參數進行調整，可按（
）鍵保存參數並退出系統參數調
enter into "System parameters" list ( need password to
enter into "User parameters" list ( No need password).
) to return back up page system parameters number
）鍵進行保存
） （
）鍵
) (
) key
）key to enter
) to save the
Advertisement
Table of Contents
