Roxie Management - Launch X-431 Manual

LAUNCH
Input the Serial Number and Activation Code (can be found from the included
Password Envelope), and then tap Activate to activate it.
Note: please be sure to keep the VCI powered on while performing the operation.

8.3 ROXIE Management

This option is used to activate and bind the ROXIE W device to the tool. Once
bound, the reports generated by the ROXIE W device will be automatically
pushed to the tool each time the inspection session is finished.
Tap ROXIE Management, a screen similar to the following figure will appear:
Fill in the ROXIE W S/N and Activation Code (can be found in the Settings on
the Job Menu), then tap Bind.
X-431 Torque III User Manual
72