Change System Language; Set Standby Time; Network Setting; Connect To A Wi-Fi Network - Launch X-431 Manual

Hide thumbs Also See for X-431:

Table of Contents

LAUNCH

1. On the home screen, tap Settings -> Display -> Brightness level.

2. Drag the slider to adjust it.

3.7 Change System Language

The tool supports multiple system languages. To change the language of the

tool, please do the following:

1. On the home screen, tap Settings -> System -> Language & input ->

Languages.

2. Tap Add a language, and then choose the desired language from the list.

3. Tap and hold the desired language and drag it to the top of the screen and

then release it, the system will change into the target language.

If no activities are made within the defined standby period, the screen will be

locked automatically and the system enters sleep mode to save power.

1. On the home screen, tap Settings -> Display -> Advanced -> Sleep.

2. Choose the desired sleep time.

Note: If you don't need to use Wi-Fi for a while, you can turn it off to conserve battery

life.

The tablet has built-in Wi-Fi that can be used to get online. Once you're online,

you can register your tool, surf the Internet, get apps, send email, launch the

remote diagnosis, and check for software updates etc.

1. On the home screen, tap Settings -> Network & Internet -> WLAN.

2. Slide the Wi-Fi switch to ON, the tablet starts searching for available wireless

networks.

3. Select a wireless network,

 If the chosen network is open, the tablet will connect automatically.

 If the selected network is encrypted, a network password will need to be

entered.

X-431 Torque III User Manual

Table of Contents