Launch X-431 Manual page 25

LAUNCH
Note: To exit and activate it later, tap Skip. In this case, please activate the VCI
by tapping Profile -> VCI Management -> Activate VCI. For details, please
refer to Chapter 9.2.
Tap Activate to finish the registration process.
c) Finish Registration: To download the diagnostic software, tap Yes to
navigate to the download page. Tap No to download and install it later.
On the download page, tap Update to start downloading. To pause
downloading, tap Stop. To resume it, tap Continue. Once download is
complete, the system will install the software package automatically.
Note: In process of download, please make sure the tablet has a strong Wi-Fi
signal. It may take several minutes to finish it, please be patient to wait.
B. If you have registered to be a member, tap Existing Customer, a screen
similar to the following appears:
Product SN
17
X-431 Torque III User Manual
Product SN
Activation code