Scanning Photos (2) - Microtek ScanMaker i4800 Manual

B. Scanning Photos (2)
This scenario uses the ScanWizard EZ - Advanced Mode.
1. Follow the step 1 in "Scanning Photos (1)" to place the photo to be scanned
on the scanner glass surface.
2. Double-click the ScanWizard EZ icon (
ScanWizard EZ.
When ScanWizard EZ is launched for the first time, the ScanWizard EZ - EZ
Mode control panel appears on the screen.
3. Click the Advanced Mode button (
to switch to the ScanWizard EZ - Advanced Mode.
4. Click the Preferences button (
choose Reflective from the Scan Mode layer as your scan material.
5. If necessary, specify other settings related to your output image in the
Preferences window.
a) Select a desired scan quality from Speed, Quality, and Best Quality
options in the Scan Mode layer.
b) Specify the folder location, a file name, and the file format for the output
image in the Save layer.
c) Specify a preferred application to open your output image in the Save
layer.
6. Click the Preview button (
image, which will appear in the Preview area at the right side of the window.
7. After a preview image is shown in Preview area, if necessary, you can resize
the scan frame (floating dotted line) around the image by dragging on the
edge or corner of the scan frame to determine the final size of the actual
scan.
8. Click the Select button (
related option settings.
9. Specify the scanning requirements depending on your purpose about
manipulating the image.
– Select a desired viewing size for the on-screen display purpose.
– Select a desired output dimension and a resolution for printing purpose.
– Set up a custom resolution.
) on your desktop to launch
) on the control panel of the EZ Mode
) to open the Preferences window; then
) to perform a preliminary view of the entire
) to activate a display of nine-image effects and
ScanMaker i4800 Supplement 7