Tray Motor - JVC CH-X1000RF Service Manual

Tray Motor

1. Remove the two screws (11) securing the tray motor.
2. Remove the two screws (12) to remove the tray motor
assembly from the tray motor holder.
Separation of the Chassis L Assembly and
Chassis R Assembly
1. Remove the two screws (13) retaining the chassis "L" and
"R" assemblies.
2. Slide the chassis L assembly toward the front and detach it,
then remove the chassis "L" upward.
1‑10
Fig. 28
Tray Motor
Slide and remove upward as
shown by the arrow
13
Front side
11
Tray Motor Assembly
Tray Motor Holder
Fig. 29
13
Fig. 30.
11
12