Basic Operations; Basic Functions For Disc Playback; Turning On The Power Of This Unit; Loading Discs In The Disc Tray - JVC XL-FZ258BK - CD Changer Instructions Manual

BASIC OPERATIONS

Basic functions for disc
playback

Turning on the power of this unit

Press the POWER button to turn on this unit. The STANDBY
indicator is turned off and the display is turned on.
Main unit
POWER
Press again to turn off the power and activate the standby mode. The
STANDBY indicator is lit.
The power is automatically turned on also by;
÷ Pressing the 0 OPEN/CLOSE button.
÷ Pressing the 3 PLAY/8 PAUSE button on the main unit or the 3
button on the remote control unit.
Notes
÷ A small amount of power (4 watts) is consumed even in the standby
mode.
÷ To turn off the power completely, disconnect the power cord from the
wall outlet.

Loading discs in the disc tray

Use the 0 OPEN/CLOSE button to open and close the disc tray.
Main unit
OPEN/CLOSE
0
1.
Open the disc tray by pressing the 0 OPEN/CLOSE button.
2.
Place discs on the disc tray according to the groove with their
label side up.
÷
To turn the disc tray and locates the disc tray to the just facing
you,Press DISC SKIP button.
3.
Close the disc tray by pressing the 0 OPEN/CLOSE button.
CAUTION
When loading discs in the disc tray, be sure to put the discs
according to the groove. Otherwise, the discs will be dam-
aged when the disc tray is closed, and cannot be removed
from the unit.
Page 7
Remote control unit
POWER
Remote control unit
OPEN/
CLOSE
Remote control operation
(for XL-FZ258BK)
Point the remote control unit towards the rote sensor and operate it
steadily and carefully. The remote control unit can be used within a
range of about 7 meters (23 feet) from the remote sensor, and at angles
of up to about 30 degrees.

Playing a disc

Press the 3 PLAY/8 PAUSE button on the main unit or the 3 button
on the remote control unit.
Main unit
PLAY/PAUSE
6
The 3 indicator lights on the display and playback starts.
To stop playback temporarily, press the 3 PLAY/8 PAUSE button on
the main unit or the 8 button on the remote control unit.
The 8 indicator lights on the display and playback stops temporarily.
To resume playback, press the 3 PLAY/8 PAUSE button on the main
unit or the 3 button on the remote control unit.
Adjusting the headphones level
Insert the headphones plug into the PHONES jack and turn the
PHONES LEVEL control to adjust the volume level.

Stopping playback

Press the 7 STOP/CANCEL button on the main unit or the 7 button
on the remote control unit.
Main unit
STOP/CANCEL
7
Remote control unit
3
Remote control unit
7