Table of Contents
Advertisement
JC12 Forced eject procedures
Check that the trays remain no more
than 10 mm inside the magazine.
Improperly positioned
Remove the dampers and the top
cover to take out the mechanism.
Remove the item(s) causing the
disc-jam through the clearance at
the top of the lifter.
Remove the lifter bracket (L) and
return the tray to the magazine.
1‑19
Magazine eject does not function.
RESET (Press EJECT for 3 sec.)
Are trays stored in
the magazine?
Check visually.
Remove the bottom cover
NO
Is the disc set in the playing
position?
Rotate the third gear clockwise and
unchuck the disc.
Disconnect the tray from the hook.
Place the unit with its left side
facing down and apply a slight
shock, then return the tray to the
magazine.
Rotate the third gear clockwise
until the lifter level is below the 9th
tray position.
Press the magazine lock lever to
eject the magazine.
Completed
YES
Completed
NO
YES
NO
Peel off the sticker on the left side
of the unit. Insert a screwdriver
and press the internal lever to
forcibly eject the magazine.
YES
Completed
Advertisement
Table of Contents
