Instructions – 4A82L *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS PRODUCT* Warning Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products. Tools Needed Phillips Driver Table of Contents...
Instructions – 4A82L Step 1 – Find shelf locations • Find desired locations for all three shelves. *Keep in mind if installing shelf accessories, or additional shelves, as distances between shelves becomes important* • Place on shelf side in orientation shown on floor or work bench.
Instructions – 4A82L Step 2 – Attach other shelf side • Place other shelf side in orientation shown. These are the typical shelf locations. • Be sure the shelf catches the shelf tab on the shelf side. • On the front and at the rear of each shelf, fasten shelf into place using twelve 1/4" x 3/8” round head screws as shown.
Instructions – 4A82L Step 3 – Attach back panels • At the backside of shelf assembly, place back panels as shown. • Attach back panels using eight 1/4" x 3/8” round head screws with washer. • TIGHTEN For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 6...
Page 7
Instructions – 4A82L Ensure all bolts are tight. Your Installation is now complete For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 7...