Installation Instructions – 48132 *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS PRODUCT* Warning Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products.
Installation Instructions – 48132 Step 1 – Slide Side Mounts Open • The side brackets came from the package pre‐installed on the rails. • Gently slide the side brackets to expose the rails. For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Installation Instructions – 48132 Step 2 – Locate and Compress Latch • Extend the side bracket all the way to view the latch. Gently click the latch to disengage the rail. (Note: If the latch's original position is up, clip down to disengage and vice versa).
Installation Instructions – 48132 Step 3 – Disengage Side Mount From Drawer • Once disengaged, gently pull the side bracket back away from the drawer to detach the side bracket completely. • Repeat above steps to disengage both side brackets. Now you are able to follow the included instructions and begin installation onto the shelf.
Installation Instructions – 48132 Step 4 – Find Location • Find desired location for shelf unit to be installed. Step 5 – Attach • Place install asm (B) into shelf unit in the orientation shown. • Be sure the install...
Installation Instructions – 48132 Step 6 – Divider • Install divider asm (C) to drawer asm (A). Bolt into place using 1/4" x 1/2" pan head screw (1). • There are multiple locations where divider can be installed. • Be sure the front of the divider goes into the slot of the drawer asm.
Page 9
Installation Instructions – 48132 Multiple shelf units may be installed in a variety of different locations. Some examples are shown below. Ensure all bolts are tight. Your Installation is now complete. For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)