Battery Icon - Honeywell ScanPal EDA50K User Manual

1. Features of ScanPal EDA50 Enterprise Hybrid Device

Battery icon

10
5. Press down the battery cover safety button to move the battery cover safety
lock to the lock position at left
Battery icon on the status bar shows the power status of the battery. The
following table only contains several of the icons. For detailed information about
battery life and power remained, please go to Settings > Battery.
Battery icon
Icon Status
Battery power is 100% full
Battery power is 50% full
Battery power is too low. Replace the battery right now.
The terminal has been connected to external power supply for
charging.
Battery failure occurs. Please replace the battery. If the failure still
exists, please contact Honeywell technical support.
ScanPal EDA50 Enterprise Hybrid Device User Guide