Changing Power Indicators - Honeywell ScanPal EDA50K User Manual

1. Features of ScanPal EDA50 Enterprise Hybrid Device

Changing power indicators

12
If the default indicators for battery charging (flashing green) is inappropriate for
your environment, you can change the indicator.
In addition to changing the default power indicator, you can also select:
•
Default Battery LED
•
No Battery LED
If you prefer the indicator to be solid amber and to change to solid green when
in charging, you need to perform Default Battery LED settings. If you prefer the
indicator as message notification (application or device management solution
notification) indicator, you need to select No Battery LED settings.
Default power indicator meanings
Connect to
Indicator status
power supply
No Flashing red
No No light
Yes Stable red
Yes Stable amber
Yes Stable green
1. Tap ll Applications > Settings > Battery LED
2. Select from the following options:
•
Default Battery LED
•
HSM Battery LED (Factory settings)
•
No Battery LED
Description
Battery power is less than 15%
full
Battery power is 15% or more
Battery power is less than 15%
full
Battery power is between 15%
to 90% full
Battery power is over 90% full
ScanPal EDA50 Enterprise Hybrid Device User Guide